Advertisement
Available languages
Available languages
6. WATER SHORTAGE ALARM: If no water flow is detected during 5 seconds during
pumping, the water shortage icon is displayed and the machine stops working.
7. ICE FULL REMINDER: When the compressor is not working, the infrared indicator light
is blocked for more than 5 seconds, then the ice full icon is displayed, and the machine
stops working. The ice full icon flashes in 1/4 seconds. The infrared continues to be
detected, and the machine continues to work when the infrared light is not blocked.
OPERATING INSTRUCTIONS
Step 1
Open the lid and take out the ice collecting tray and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not exceed the
MAX position. If the water exceeds the maximum scale MAX, you need to open the bottom
drain plug, release the excess water, and cover with a transparent cover.
Step 2
Plug in the power and press the START/STOP button to start the machine.
Step 3
Select the size of the ice you want to make, the default is large ice.
WARNING
1. When the indoor temperature is lower than 15 degrees, please choose small ice. When
the indoor temperature is higher than 30 degrees, it is recommended to choose large ice.
2. The three cycles used for the first time, the ice produced is small and irregular.
3. When the ice collecting tray is full, please take out the ice immediately, do not let the ice
overflow the ice collecting tray.
Advertisement
