1. Manuals
  2. Brands
  3. Biorep Technologies Manuals
  4. Grinder
  5. BG-01
  6. Operating manual

Biorep Technologies BG-01 Operating Manual

Bone grinder
Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

BONE GRINDER
Model No. BG-01
OPERATING MANUAL
© 2016 Biorep Technologies, Inc.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BG-01 and is the answer not in the manual?

Questions and answers

Summary of Contents for Biorep Technologies BG-01

  • Page 1 BONE GRINDER Model No. BG-01 OPERATING MANUAL © 2016 Biorep Technologies, Inc.
  • Page 2 SAFETY PRECAUTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage”...
  • Page 3 IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
  • Page 4 Introduction The Bone Marrow Machine is used to cut bone (vertebral bodies - VB) into small pieces. In order to release the bone marrow, bones are fed into the stationary blade and the rotary blade grinds the larger pieces into smaller particles. Identification of Machine Parts...
  • Page 5 Specifications MODEL NO: BG-01 POWER SOURCE: 115 VAC. FUSE: 5 Amps Controls Power Entry Module: The Power Entry Module has the Main Switch which turns on and off the machine. When this switch is turned on, the Rotary Blade works in the forward direction.
  • Page 6 2. Slide the Stationary Blade (without the plunger) into place and align the blade with the teeth on the Rotary Blade. (To align the teeth, adjust the distance of the Rotary Blade from the machine.) 3. Tighten both of the Stationary Blade Clamping Handles. 4.

Table of Contents