Summary of Contents for Lagute Sciener
- Page 3 Sciener smart lock Instructions • Ö Notes： • 1、Hardware:Android or IOS device with bluetooth • Android: Operating system Android 2.0 and above • IOS: IOS device with bluetooth 4.0(iPhone 4s,iTouch 5,new iPad and above) • 2、Keep the APP running and make sure the bluetooth is turned on when using or setting the devices.
- Page 4 Tips before using • User account: A Sciener account is needed when adding a new user. • IOS version APP can register and sign in at the start page. • Android version need to sign in during the process of adding an user.
- Page 5 Add user • Operating Procedure： • 1、Setting the devices：Hold the setting button beside the batteries,after you hear a long beep,it means the lock is in setting mode,and do not release the button until you finish all the setting steps).
- Page 6 • 2、Add user： • Open the Sciener APP and sign in with a sciener account,touch the “+” button to search the lock which is in setting mode,choose the lock to connect and save it,you will hear a beep if it succeeds,and you can release the setting button.
- Page 7 （3） （4） （1） （2） （5）...
- Page 8 • 3、Now you can open the door with just one press of the unlock button on the lock,and turn the handle after a beep and a buzzer.Three seconds later,the it will be relocked.
-
Page 9: Unlock Options
Unlock Options • Auto connect & Manual connect... - Page 10 • When you choose Auto connect,you don’t have to open the Sciener APP,it can be connected when it’s running in the background. • If you choose Manual connect,you need to enter the app before you press the unlock button.
- Page 11 Set the connecting distance • You can set the connecting distance between the lock and your mobile device...
- Page 12 Set the ONE BUTTON CODE • Just in case of the mobile is out of power and you don’t have the key either,you can also open the door with the ONE BUTTON CODE.Only the administrator of the lock can set and change the code.
- Page 13 TWO WAYS TO SET THE CODE • First,hold the setting button,and do not release until it’s finished.Choose the one button code and set the code with 6-10 numbers(“0” not included). • The second way,you just input the code(6-10 numbers without “0”),and press the unlock button to save.
- Page 14 How to use the ONE BUTTON CODE • 1、Hold the unlock button until you hear 2 beeps which means the lock is in ONE BUTTON CODE mode. • 2、Press the unlock button to input your code.Press one time stands for number “1”,two times stands for number “2” and so on.Please note that,when input a number you need to stop and wait for a beep to input the next one.
- Page 15 Manage the users • This function is only available for the administrator to manage the normal users.With this function,the administrator can add, delete or block any normal user.
- Page 16 Check the unlock records • The administrator can check all the unlock records of the lock...
- Page 18 Clear the lock data • Hold the setting button to enter the setting mode,and then hold the unlock button until you hear a beep,which means the lock is empty now.
- Page 19 SHARE THE KEY • This function allows the administrator to share the key to any other registered user of Sciener.The administrator can limit the effective time of the key. • The first version(V1.0) of the lock can not support this function.
- Page 20 • Step 1:Enter “Manage Users” and then choose “Send A Key”.
- Page 21 • Input the other sicners uses account and set the effective time,and send the key. Currently the basic time unit is hour.
- Page 22 • When you receive a key from the administrator,you can enter “My Account”-“My Keys” and click the key to use.