Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for MAXXCELL OG-5KMAX
- Page 1 USER GUIDE Solar Inverter Solar Inverter 358-010009-01 www.maxxcell.com.au...
-
Page 2: Table Of Contents
• High charging current: the maximum charging current can be 200A for the OG-10KMAX, Specification…………………………………… … …… … … … … ……03/04 180A for the OG-7.5KMAX, and 170A for the OG-5KMAX. Front panel……………………………………………………………………05 • Wide range of AC input voltage: AC input range of 90-280V. This wide range makes it ideal for LCD Display icons………………………………………………... -
Page 3: Diagram
Power inverter Power inverter Specifications Diagram Line Mode Specifications Model OG-5KMAX OG-7.5KMAX OG-10KMAX Rated Output Power(VA) 5000VA 7500VA 10000VA Rated Output Power(W) 4000W 6000W 8000W Nominal DC Input Voltage Input Voltage Waveform Sinusoidal(Utility or generator) Nominal Input Voltage 220Vac Low Line Disconnect 90Vac±7Vac... -
Page 4: Front Panel
Flooded Indicator light instruction Adjustable, up to 16V/31.5V/61.0V Self-defined Inverter Mode Specifications Enabled: LCD backlight stays on. LCD backlight OG-5KMAX OG-7.5KMAX OG-10KMAX Model Disabled: LCD backlight will turn off after inactivity of 60 seconds Output Voltage Waveform Pure sine wave 220Vac±5%... -
Page 5: Lcd Display Icons
Indicates load is supplied by utility directly. Indicate output voltage, output frequency, load percent, load in VA, load in Watt. Indicates the inverter / charger is working. Battery Information Mute Operation Indicates battery level by 0-24%, 25-49%, The alarm is disabled. 50-74% and 75-100%. www.maxxcell.com.au... -
Page 6: Lcd Setting
The battery type is LIb + PV charging current) 5000VA： Max utility Setting range is from 0 to 50A charging 7500VA： current Setting range is from 0 to 60A 10000VA： setting Setting range is from 0 to 80A www.maxxcell.com.au... - Page 7 first. If PV energy is not sufficient, battery will feed power to the loads. Utility provides power to the loads only when any one condition happens: (1) PV is unavailable; (2)Battery voltage drops to low-level warning voltage or the setting point in program 19. www.maxxcell.com.au...
-
Page 8: Display Information
PWM Charge Controller software version （for PWM Charge Controller Build-in） CHARGING PV power Charging current PV power is 2KW Charging current is 40A (for PWM / MPPT Charge Controller) Output frequency Load percentage Output frequency is 50Hz Load percent is 80% www.maxxcell.com.au... -
Page 9: Fault Code Table
Faults for pv over voltage of built in MPPT voltage low connect a big power load, disconnect the big one and turn on the inverter, confirm it can work normally. Current sensor Please contact our Support Desk. is abnormal www.maxxcell.com.au...
Need help?
Do you have a question about the OG-5KMAX and is the answer not in the manual?
Questions and answers