Advertisement
Quick Links
Thank you for purchasing the Anchor Two light
The product offer anchor light at a very low power consumption. The product is designed in high quality for many
years usage in harsh marine environment.
The installation is easy and the product can be mounted / unmounted easily again with the connector.
Positioning and Operation
•
May only be installed on sailing vessels of less than 12 meters in length.
•
Carried near the top of the mast, where the light can be seen all round without any obstructions.
Connecting power
•
Supply Voltage between 10VDC and 30VDC
•
Recommended <2A (slow) fuse or circuit breaker
Specifications
Lamp House
Lamp Lens
Mounting bracket
Visible Distance
Light Source
Voltage protection
Power Consumption
Dimensions
Weight
Warranty:
Anchor Two - Instructions
UV/corrosions resistant anodized aluminium or black powdered
UV resistant PMMA
316 stainless steel
2 Nautical Miles (yacht) Anchor light
LED
Reverse polarity protected
Spike protected to +500 volts
Electromagnetic Compatilities (EMC)
Allround White / Anchor less than 1W 75mm (diameter) x 75mm (height)
430g
1 years product limited warranty. If you want to claim a warranty for your product,
please write an email to claim@norbylight.com
ANCHOR TWO
Page 1/2
Advertisement
Summary of Contents for NORBY ANCHOR TWO
- Page 1 ANCHOR TWO Thank you for purchasing the Anchor Two light The product offer anchor light at a very low power consumption. The product is designed in high quality for many years usage in harsh marine environment. The installation is easy and the product can be mounted / unmounted easily again with the connector.
- Page 2 Mount lamp to bracket. The ins�������� Service • Clean ONLY with freshwater or a damp cloth • DO NOT use alcohol or thinner for cleaning. This could damage the lens. • Lubricate the connector pins if needed. Anchor Two - Instructions Page 2/2...