Philips DVDR520H Software Upgrade Instructions page 4

The following steps are applicable only when ERROR occurs.
Do not power off; wait for the tray to eject and remove the
A.
Upgrade disc.
Power off and on again with the Standby button and the set will FTD
B.
will display:
Repeat steps 2 to 8. If the set FTD still display ERROR please
C.
contact your Service workshop for help.
__________________________________________________________________
7. After the upgrade
Do confirm the software version by checking the system version.
Please follow the procedure described in the section
Verification Procedures".
PUT IN CD
"Software Version