Table of Contents
Advertisement
Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be
damaged by rough handling or excessive pressure.
1. Place your monitor with the screen face down on a soft flat surface.
2. Align the stand assembly bracket to the monitor.
3. Insert the base towards the stand until it locks in place.
Note: To install a VESA mount, please see "Wall Mounting (Optional)" on page 2-10.
Product overview
This section will provide information on adjusting monitor positions, setting user controls,
and using the cable lock slot.
Types of adjustments
Tilt
Please see the illustration below for an example of the tilt range.
Height Adjustment
For height adjustment, user needs to press down or lift up the monitor.
135mm
Chapter 1.Getting started 1-2
Advertisement
Table of Contents
