C-TEC CAST ZFP Quick Start User Manual

Quick Start User Guide for the CAST ZFP Fire Alarm Control Panel
T
HIS GUIDE IS FOR GENERAL USERS
SUMMARISES KEY INFORMATION PROVIDED IN THE MAIN USER MANUAL
THE MAIN MANUAL WHICH SHOULD BE READ THOROUGHLY
Operator Actions in the event of a Fire Alarm
The designated responsible person should carry out the building's fire management plan. Depending on this plan you may:
Silence active alarm sounders:
Reset the panel:
Resound the alarm sounders
(when alarm sounders are silenced):
Silence the panel's internal buzzer: Press
Access Levels
The panel has three access levels, each level provides various menu options (see overleaf for menu structure).

Access level 1 is for general users and allows basic operator actions to be performed such as checking panel indicators.
To enter access level 1: Press

Access level 2 is for authorised users and provides additional features such as setting system disablements, setting
the time/date and changing the access level 2 code. The default entry code to access level 2 is:
To enter access level 2: Press
OR turn the panel keyswitch anticlockwise to the horizontal (I) position.

Access level 3 is for authorised system engineers only and is the panel's engineering/programming level.
Touchscreen, Indicators & Controls
Example module (Z45)
with controls & indicators
entry to access level 2
Fire, Fault, Disablement, Test
ZFP Standard Panel
Additional Operator Actions
Display active fires:
Display active faults:
Display active disablements:
Display active tests:
View more events and menus: Press
General fault(s): The touchscreen will show a message detailing the type and location of the fault. Call the engineer.
( 1)
ACCESS LEVEL
Press
Ensure the cause of the alarm has been investigated, cleared and alarm sounders are silenced.
Press
Enter access level 2 (if requested), then press
then press
Additional indicators:
Power, Fault, Access, etc.
Keyswitch for
Event indicators:
Press
Press
Press
Press
and
Approved Document No. DFU5030060 Rev 2
(
AND AUTHORISED USERS ACCESS LEVEL
(
DOCUMENT NO
.
then enter access level 2 (if requested)
then enter access level 2 (if requested)
then enter the 4-digit code,
Event buttons (change colour when active)
Touchscreen
- scroll up
(the total number 'n' of faults is shown on this button)
(the total number 'n' of disablements is shown on this button)
(the total number 'n' of tests is shown on this button)
2)
OF THE CAST ZFP PANEL AND
. ).
5030050
DFU IT IS NOT A SUBSTITUTE FOR
3333.
Action buttons
Navigation buttons
- displays user menus
- returns to previous menu
- scroll down