Page 6
IDLE CURRENT ADJUSTMENT Connect the voltmeter to JP2 ( JP102) ADJUST R23 ( R123 ) TO 20mV After the power has been on for 60 min readjust R23 (R123) Remove the voltmeter. Instructions apply to the Right channel. Instructions given in brackets apply to the Left channel.
TECHNICAL SPECIFICATIONS Output power per channel 120W/8 ohm,200W/4 ohm (1X400W) Output impedance 0.03 ohm DC offset <5mV Frequency response <10HZ-100KHZ -3db Signal to noise A-weighted 100 dB THD+noise <0.08% Standby <3.5W DIMENSIONS (WXDXH) 430X385X100 MM Weight 16Kg...