Download Print this page

Noise Reap Foundation User Manual

Advertisement

Quick Links

Foundation
User Manual v1.0
Overview
The Foundation is an original bassdrum
synthesizer with a smooth and organic
sound. It's modeled after an actual
acoustic drum. Each part of the physical
instrument has been translated into
analog and digital electrical components.
Technical
Specifications
● Width 10hp
● Depth 28mm
● Current draw 20mA @ +12V
● Current draw 10mA @ -12V

Advertisement

loading

Summary of Contents for Noise Reap Foundation

  • Page 1 Foundation User Manual v1.0 Overview The Foundation is an original bassdrum synthesizer with a smooth and organic sound. It’s modeled after an actual acoustic drum. Each part of the physical instrument has been translated into analog and digital electrical components.
  • Page 2 Inputs STRIKE Triggered by any hard edged waveform greater than 2V. Sets the drum in motion. 5V range. Controls the amount of RING. Positive voltages increase RING, negative decrease. 10V range. Standard 1V per octave input to control the drum tuning. NUDGE 10V range.
  • Page 3 Knobs RING Controls how long the drum “rings out”. This changes the decay length of both the main envelope and a shorter envelope controlling the texture transient. BEND This control mimics the amount the drum membrane bends when struck. It applies a fixed 45mS sweep to the tuning.
  • Page 4 Set up a kick sound with no damping. Run it through a nearly closed lowpass filter with plenty of resonance. Use the Foundation envelope to open the filter. Anomaly works really well for this because it adds a bit of additional grit and character.