Table of Contents
Advertisement
Number Setting
2
Rinse aid level
3
End sound
4
Auto door open
5
Key tones
6
Latest pro‐
gramme selec‐
tion
7
Display on floor
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
When the appliance is in setting mode,
the bars of the ECOMETER represent
available settings. For each setting, a
dedicated bar of the ECOMETER
flashes.
The order of the basic settings presented
in the table is also the order of the
settings on the ECOMETER:
1 2
3 4 5 6 7
7.1 Setting mode
How to navigate in setting
mode
You can navigate in setting mode using
MY TIME selection bar.
Values
Description
0A - 6A (default:
Adjust the level of the rinse aid according
6A)
to the necessary dosage.
On
Activate or deactivate the acoustic signal
Off (default)
for the end of a programme.
On (default)
Activate or deactivate the AirDry.
Off
On (default)
Activate or deactivate the sound of the but‐
Off
tons when pressed.
On
Enable or disable the automatic selection
Off (default)
of the most recently used programme and
options.
On (default)
Activate or deactivate the TimeBeam.
Off
A. Previous button
B. OK button
C. Next button
Use Previous and Next to switch
between the basic settings and to
change their value.
Use OK to enter the selected setting and
to confirm changing its value.
How to enter setting mode
You can enter setting mode before
starting a programme. You cannot enter
setting mode while the programme is
running.
To enter setting mode, press and hold
simultaneously
about 3 seconds.
The lights related to the Previous, OK
and Next are on.
ENGLISH
1)
A
B
C
and
13
for
Advertisement
Table of Contents
