Advertisement
Quick Links
User Instruction for the Rear Loading Bariatric Commode
Moulded seat
(720148S)
Transportation
wheels
1. Introduction
The Bariatric Commode has a steel frame and is fitted with transportation wheels for ease of use. The frame has been coated
with a nylon modified epoxy powder for ease of cleaning. The padded upholstery is heat-sealed so it can be cleaned without
risk of water ingress. (Please note the transport wheels are designed to aid the movement of the product, this is not a mobile
commode!)
Seat height
Padded seat thickness
Width between arms
Seat to top of arms
Seat to top of back
Orifice width
Orifice depth
Maximum footprint
2. Contents of the Box
Extra Wide Commode (X220)
•
Potty with handle (71019F/H)
•
Moulded Seat (720148S)
•
Vinyl Seat
•
User Instructions (this leaflet)
•
3. Assembly Instructions
Carefully unpack and examine the product to ensure it is complete.
•
Before use check for any signs of damage e.g. cracked weld, flaking of paint, bent tube. If any signs occur please
•
contact your supplier to exchange and refrain from using the product. DO NOT ATTEMPT TO USE IF PRODUCT IS
DAMAGED.
4. Correct Use
Ref: X220Aug2010
Form No: Cef 0035
Fixed Height & Arms
X220
Product Dimensions
450mm
20mm
735mm
200mm
405mm
255mm
300mm
800mm x 540mm
Fixed Height & Arms
Bariatric Commode
– X220
Vinyl Seat
Potty with
handle
(71019F/H)
Advertisement
Related Manuals for Cefndy X220
Summary of Contents for Cefndy X220
- Page 1 Seat to top of back 405mm Orifice width 255mm Orifice depth 300mm Maximum footprint 800mm x 540mm 2. Contents of the Box Extra Wide Commode (X220) • Potty with handle (71019F/H) • Moulded Seat (720148S) • Vinyl Seat • User Instructions (this leaflet) •...
- Page 2 To fold it down, push the handle vertically downwards to release the locking tabs before folding it backwards towards the rear handle. To fit the pan (X220), ensure that the pan handles are • lifted clear of the support brackets then slide the pan across the rear supporting brackets fitted to the commode until contact is made with the front of the bracket.