Advertisement
Mechanical and Dismantling Instructions
Dismantling Instruction
Step3: If the tray can't open in normal way, you can make it through the instruction as below (Figure 3).
Note: Make sure to operate gently otherwise the guider would be damaged.
Push the guider until the tray out.
Make sure to operate gently to
avoid damage happening.
Step4: Dismantling Front Panel, disconnect the connectors (XP5, XP6, XP7), then release the snaps on the both sides of Front
Panel and bottom cabinet , then gently pull the Panel out from the set. (Figure 4 & 5)
3-2
Figure 3
XP7
Figure 4
XP6
XP5
Snap 1
Advertisement
