Advertisement
IN-WALL & IN-CEILING SYSTEMS WITH HIGH-END TONAL BALANCE
T E C H N O L O G Y
CI
Custom Installation Series - Universal Mounting Options
Mounting Options
CI-FGR QM
All CI in-ceiling speakers are now manufactured with the new CI-FGR QM
Quick Mount system, making installation the easiest you've
ever done. No longer will you have to suffer through holding speakers in
place overhead while tightening their screws. Newly developed
clamps engage to hold the speaker in the flange. Simply twist the speaker
counter-clockwise into the flange. The clamps engage with the
tabs on the flange. The speaker is then held secure while you safely tighten
the screws.
All previously-produced CIs and flanges are compatible with the newer
models. New CIs fit older flanges by removing the new clamps
from the speakers before installation and then using the screws included
in the box. Or vice-versa, older CIs fit the new flanges by adding
readily-available clamps to the speakers.
CI-FGR QM
Quick Mount clamp prior to engagement
with the flange
CI-FGR T
This 15˚ tilt-mount is compatible with
five in-ceiling models, allowing the
speaker's sound to be directed at the
listener or to compensate for an angled
ceiling.
CI-FG QM
Any of the seven in-wall CI models fit
our CI-FG QM, featuring a patented
tool-free clamping system for an easy
and clean installation or for changing
speakers.
All CI series speakers are covered by a limited lifetime warranty. Amplifiers are covered for three years.
Speaker is rotated counterclockwise
to engage Quick Mount clamp with
flange
CI-FGR T
CI-FG QM
Specialty Installation Products for
Even Higher Performance
Sometimes we look for higher output or more extended bass response,
even though we need to use inconspicuous flush-mount speakers. Phase
Technology makes in-wall subwoofers with integral enclosures and compan-
ion amplifier/crossover components to meet your need for more dramatic
sound. The 7" IW-100 is suitable for smaller rooms, while the dual 8"
IW-200 produces serious bass response in larger spaces. Each 200 watt
P-200 amplifier can drive an additional sub enclosure for even more low
frequency output.
For those listeners with more sophisticated needs, we proudly offer our
CI-110 in-walls. These highly-reviewed speakers feature twin 6.5" RPF
woofers along with 1" soft-dome tweeters. They add our exclusive Unicell
acoustic foam to eliminate tweeter diffraction and utilize our patented
Positive Clamping
system to assure a tight seal with all walls for the best
possible sound quality. They share all speaker and crossover technology
with our acclaimed Premier Collection speakers. You can't do any better
than the CI-110 II if you're serious about sound but need to keep speakers
discreetly hidden in the walls.
In-Wall Subwoofers
IW-100
Woofer
7" mica/graphite poly cone
Frequency
30-160 Hz (+ 3dB)
-
Enclosure Dim.
42" H x 14 3/8" W x 3 3/8" D
Cutout Dim.
11 5/8" H x 8 1/2" W
Mounting
Enclosure mounts between 16"
on-center 2x4 studded wall,
3.5" D
Weight
36 lbs (in enclosure)
Recommended
Up to 1800 cubic feet
Room Size
P-200 Amp
• 200 watts continuous/300 watts peak
• Three modes: Sub, LFE, and Full-Range
• User-adjustable gain control matches the sub
to any system's efficiency
• Internal crossover range from 40-160 Hz
0º /180º phase switch
• Variable low frequency boost from -3dB to
+6dB allows for tuning to any room's acoustics
• Dimensions: 17.75"W x 1.875"H x 11.75"D
• Weight: 18 lbs
IW-200
Dual 8" mica/graphite poly
cone
25-160 Hz (+ 3dB)
-
72" H x 14 3/8" W x 3 3/8" D
20 1/2" H x 8 3/4" W
Enclosure mounts between 16"
on-center 2x4 studded wall,
3.5" D
51 lbs (in enclosure)
1800-3300 cubic feet
Advertisement
