Table of Contents
Advertisement
Operating the product
Auxiliary functions
Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soil,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
C
Auxiliary functions may cause
changes in the programme
duration.
C
Auxiliary functions are not
suitable for all washing
programmes. Indicator of the
auxiliary function that is not
compatible with the programme
will not be active.
To add auxiliary function to the
programme:
1.
Select the desired washing programme
by pressing the programme selection
key.
2. In the selected washing programme, if
auxiliary function is selected, its symbol
will be displayed on the screen. If the
function button is pressed again the
symbol will disappear and selection is
cancelled.
3. Selection will be cancelled when you
press the function key again.
Fast+ Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
Extra Drying Function
It provides superior drying performance.
28
/42 EN
AquaIntense Function
lower basket. It will give better results to
place the most soiled dish to the right front
side.
C
Do not try to remove the
AquaIntense impeller!
EverClean Filter
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
To change the filter cleaning
settings:
1.
After switching your machine on,
press Time Delay and P / P+ keys
simultaneously. Keep them pressed until
the countdown 3, 2, 1 is completed on
the display.
2. Go to the F: position on the display by
pressing the P / P+ key. Filter cleaning
function is disabled in «F:0» position. It
is enabled in «F:1» position. Select the
position you want with the Time Delay
key.
3. Turn off the machine with the On/Off
key to save the changes.
Dishwasher / User's Manual
AquaIntense impeller
located under the
lower impeller helps
washing your heavily
soiled dishes places in
the right side of the
Advertisement
Table of Contents
