Subscribe to Our Youtube Channel
Related Manuals for Westwood Design COTTAGE COLORS CC-CR-2401NR-WHT
Summary of Contents for Westwood Design COTTAGE COLORS CC-CR-2401NR-WHT
- Page 1 COTTAGE COLORS Convertible Crib Model: CC-CR-2401NR-WHT ( CR2401NR-W ) CC-CR-2401NR-GRY ( CR2401NR-G ) RTG SKU #: 39124083 ( WHT ) 39124095 ( GRY ) Assembly Instruction...
- Page 2 1-908-719-4707, or emailing support@westwoodbaby.com If any aspect of these instructions is unclear, please contact your retailer or Westwood Design for assistance. In addition to meeting our own extensive in-house testing and standards, this crib has been independently tested to meet JPMA certification standards.
- Page 3 SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE. DO NOT USE CRIB IF ANY PARTS ARE MISSING OR BROKEN. ASK YOUR DEALER OR CONTACT WESTWOOD DESIGN: 635 N. BILLY MITCHELL RD., STE. B, SALT LAKE CITY, UTAH 84116, PHONE: 1-908-719-4707, EMAIL: SUPPORT@WESTWOODBABY.COM; FOR REPLACEMENT...
- Page 4 Parts & Hardware Included Headboard (x1) Footboard (x1) Crib End, Left (x1) Crib End, Right ( x1 ) Stabilizer Bar ( x1 ) Mattress Support (x1) M6 x 50mm Bolt ( x12 ) M6 x 15mm Bolt ( x4 ) Allen Wrench (x1)
- Page 5 Required Parts & Hardware (A) Headboard ( x1 ) (C) Crib End, Left ( x1 ) (D) Crib End,Right ( x1 ) (G) M6 x 50mm Bolt (I) Allen Wrench ( x4 ) Step 1...
- Page 6 Required Parts & Hardware Stabilizer Bar (x1) (G) M6 x 50mm Bolt (I) Allen Wrench ( x4 ) Step 2...
- Page 7 Required Parts & Hardware Mattress Support (x1) (H) M6 x 15mm Bolt (I) Allen Wrench ( x4 ) Step 3 There are three possible height settings. The mattress support should be at the highest setting for a newborn, then adjust to the lower position as the child grows and becomes mobile. Once the child is able to stand, adjust to lowest position.
- Page 8 Required Parts & Hardware Footboard (x1) (G) M6 x 50mm Bolt (I) Allen Wrench ( x4 ) Step 4...
- Page 9 DAY BED CONVERSION (I) Allen Wrench Step 1 The day bed can only be used with the mattress support in its lowest position. Remove the bolts from the footboard using the allen wrench provided. Keep the footboard and hardware for future assembly and use.
-
Page 10: Care And Maintenance
CARE AND MAINTENANCE - After completing assembly, check that all bolts and screws are secure and tight. Hardware can become loose over time, so it is your responsibility to periodically check the tightness of all fasteners for as long as you use the crib. - Wood is a natural material.
Need help?
Do you have a question about the COTTAGE COLORS CC-CR-2401NR-WHT and is the answer not in the manual?
Questions and answers