Stand Legs - McConnel SEEDAERATOR Operator's Manual

STAND LEGS

The machine is equipped with 2 stand legs; these are primarily for supporting the machine
when it is either 'parked up' or in storage.
In addition to the instances mentioned above, the machine should also be placed onto its
stand legs before attempting to make adjustments to any components or when performing
maintenance tasks.
Before resting the machine down on the stand legs they must be fitted in the correct
location on each side of the machine and secured in place with the pins and linch pins
provided - refer to illustrations below.
A firm level site capable of supporting the weight of the machine must always be selected.
For 'parking up' and/or storage the site should be level hard standing ground. Protect front
tines by parking them on wood blocks or planks.
Stand Leg Locations & Positions
Stand legs in machine support location / position.
CAUTION! Machine must always be placed to rest on its stand legs during adjustments,
maintenance, extended parking periods and at all times when it is not attached to a tractor.
Stand legs must always be secured with pins and linch pins. Park tines on wooden blocks.
Stand legs in stowed location / position.
11