Samsung NX60T8111S Service Manual page 59

4. Troubleshooting
Oven Sensor information
Disconnect power and Assy Display PCB
* Check whether there is any damaged parts of PCB pattern.
* Measure oven sensor resistance.
* Check the connecting condition of
harness related with oven sensor.
* Check connector and harness connected to sub PCB
* Check whether harness on connector
(CN300) of main PCB is connected with connector
(CN100) of sub PCB.
This document can not be used without Samsung's authorization.
"C-21"
DLB : TB200 – TB201
BROIL : TB202 – TB203
BAKE : TB204 – TB203
Ok
Ok
END
DLB
DLB Relay
No
* Replace Main PCB
* Reconnect after replacing the oven sensor.
No
Replace or repair the
No
59
Broil Bake
Broil Relay Bake Relay Conv. Relay
END
END
harness.