Technical Data - Electrolux EIS84041 User Manual

20 www.electrolux.com
Problem
The heat setting
changes between two
levels.
The control panel be‐
comes hot to the touch.
There is no sound when
you touch the panel sen‐
sor fields.
comes on.
comes on.
and a number come
on.
9.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Give also
three digit letter code for the glass
ceramic (it is in the corner of the glass

10. TECHNICAL DATA

10.1 Rating plate
Model EIS84041
Typ 62 D4A 01 AA
Induction 6.9 kW
Possible cause
Power management oper‐
ates.
The cookware is too large
or you put it too close to
the control panel.
The sounds are deactiva‐
ted.
Child Safety Device or
Lock operates.
There is no cookware on
the zone.
The cookware is unsuita‐
ble.
The diameter of the bottom
of the cookware is too
small for the zone.
There is an error in the
hob.
surface) and an error message that
comes on. Make sure, you operated the
hob correctly. If not the servicing by a
service technician or dealer will not be
free of charge, also during the warranty
period. The information about guarantee
period and Authorised Service Centres
are in the guarantee booklet.
PNC 949 599 172 00
220 V 60 Hz
Made in: Germany
Remedy
Refer to "Daily use".
Put large cookware on the
rear zones, if possible.
Activate the sounds. Refer to
"Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use cookware suitable for in‐
duction hobs. Refer to "Hints
and tips".
Use cookware with correct
dimensions. Refer to "Tech‐
nical data".
Deactivate the hob and acti‐
vate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin‐
ues, speak to an Authorised
Service Centre.