LTC LXLTC04 User Manual

LXLTC04/LXLTC05/LXLTC07
LED alarm clock with thermometer
Thank you for choosing the LTC brand device.
Before using the device, read the instruction manual.

Notes

• Do not disassemble the device, as this may cause damage and void the warranty.
• Clean the device when it is turned off with a soft cloth.
• Do not expose the device to dropping, dust, extreme temperature and moisture, as this may shorten the life of the
device.
• Do not use the device in strong sunlight and protect it from flooding.
• This product is a sensitive electronic device and radio devices in the vicinity (such as telephone, radio, microwave,
etc.) may affect the performance of the instrument. If symptoms such as poor measurement are noticed, move the
radio device away or turn it off while using the instrument.
• Read the instruction manual before using the device.
• The manufacturer reserves the right to change the content of the manual at any time and the possibility of making
changes to the device without prior notice.

Product features

• The device has 4 main functions: time, date, alarm clock, thermometer.
• The display shows: year, month, day, hour, minute, temperature.
• Four function buttons: SET, UP, DOWN, RESET.
• Indoor temperature measurement range: 0ºC ~ 50ºC.
• Ability to change the displayed temperature unit: Celsius, Fahrenheit.
• 3 display modes.
• Has an energy-saving mode.
• Turn on the display by sound, for example, by clapping your hands.
User
Display modes
• In the time view, pressing the SET button switches between display modes.
Manual
Display sequence: time --' date --' alarm1 --' alarm2 --' alarm3.
• In the time view, press the UP button to change the default display mode.
Mode sequence: Dp1 --' Dp2 --' Dp3.
• Dp1 mode: the display shows the time and date alternately. The hour for 15 seconds, the date for 2 seconds.
Press the SET button to manually switch between time and date.
• Dp2 mode: the display defaults to display the time at all times. You can change the default display by pressing the SET
button. Display sequence: time --' date --' alarm1 --' alarm2 --' alarm3.
• Dp3 mode: The display shows the time at all times. By pressing the SET button, you can change the displayed value. Display
sequence: time --' date --' alarm1 --' alarm2 --' alarm3 --' temperature. When the mode is selected, it will be displayed for 15
seconds after which the display will return to the time mode.
• To enter the energy-saving mode, press the DOWN button. If the mode is turned on, the display will show "oNSd". If the
mode is turned off the display will show "Sd".
• To turn on the display in energy-saving mode, tap the device or clap your hands. Sounds in the 70 - 80 dB range will also turn
on the display.
• Hold the DOWN button for 2 seconds to change the displayed temperature unit.

Time settings

• To access the time setting in the time view, hold down the SET button for 2 seconds. The active setting will start flashing.
• Use the UP / DOWN buttons to set the format of the displayed time --' hour --' minute, after each step, press the SET button
to move on. After setting the minute, press the SET button, button to approve the changes.
• The unit will return to standard mode after 15 seconds of inactivity.

Date settings

• To access the date setting in the date view, hold down the SET button for 2 seconds. The active setting will start flashing.
• Use the UP / DOWN buttons to set the year --' month --' day, after each step press the SET button to move on. After setting
the day, press the SET button to confirm the changes.
• The unit will return to standard mode after 15 seconds of inactivity.