Related Manuals for Sun joe GTS4002C
Summary of Contents for Sun joe GTS4002C
- Page 1 User Manual of Product 1: Sun Joe GTS4002C Cordless Lawn Care System-Hedge Trimmer, Pole Saw, Grass Trimmer | 40.7 x 2 x 3 inches |...
-
Page 2: General Safety
OPERATOR’S MANUAL Model GTS4002C A Division of Snow Joe , LLC ® Form No. SJ-GTS4002C-880E-MR6 IMPORTANT! CAUTION! – Exercise caution to avoid slipping or falling. Wear protective footwear that will protect your feet Safety Instructions and improve your footing on slippery surfaces. -
Page 3: Cleaning The Tool
Failure to follow these instructions can result in serious To order genuine replacement parts or accessories for the personal injury or property damage. Sun Joe GTS4002C cordless lawn + garden multi-tool ® system, please visit sunjoe.com or contact the Snow Joe WARNING! ®... - Page 4 It will perform more effectively and safely if it is this pole chain saw. Only use genuine Snow Joe used at the rate for which it was designed. ® Sun Joe replacement parts designed specifically for use ® 7. Use extreme caution when cutting a limb that is under with this pole chain saw.
-
Page 5: Battery & Charger Safety Instructions
4. Maintain a firm grip on the handle and the pole/auxiliary 16. If the grass trimmer + edger strikes a foreign object or handle while cutting with the blade. Keep the blade away becomes entangled with it, stop the tool immediately. from body. -
Page 6: Information About The Battery
If the battery or charger are damaged, apparent externally. contact an authorized Snow Joe + Sun Joe dealer or ® ® call the Snow Joe... -
Page 7: Protection From Environmental Influences
(4.5°C – 40.5°C). by a qualified technician at an authorized Snow Joe ® Sun Joe dealer or call the Snow Joe + Sun Joe ® ® ® 5. Do not keep the battery charger in places where the customer service center at 1-866-SNOWJOE temperature is liable to reach over 104°F (40°C). -
Page 8: Safety Symbols
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, SAFETY ALERT –... - Page 9 Know Your Cordless Lawn + Garden Multi-tool System Read the owner’s manual and safety instructions carefully before operating the cordless multi-tool system. Compare the illustration below to the cordless multi-tool system in order to familiarize yourself with the location of the various controls and adjustments.
-
Page 10: Technical Data
If you find damaged or missing parts, DO NOT return the unit to the store. Please Grass Trimmer + Edger call the Snow Joe + Sun Joe customer service center at ® ® Motor ................200 W 1-866-SNOWJOE (1-866-766-9563). -
Page 11: Charger Operation
Charging the Battery 1. Push the push lock button on the battery to pull the battery pack out from the battery compartment (Fig. 1). Lights Light Indicators Fig. 1 Charge level button The battery is at 30% capacity Push button and requires charging The battery is at 60% capacity and requires charging soon... -
Page 12: Pole Chain Saw
IMPORTANT! Never allow the battery pack to become fully discharged as this will cause irreversible damage to Fig. 5 the battery. Pole Chain Saw Assembly Chain/sprocket DANGER! Never start the motor before installing the end cover guide bar, chain, and chain/sprocket end cover. Without all these parts in place, the clutch can fly off or explode, exposing 3. - Page 13 NOTE: Make certain of the direction of the chain If the chain is mounted backwards, the saw will vibrate Fig. 11 abnormally and will not cut. Fig. 8 Chain/sprocket Chain tensioner end cover ring Connecting to the Telescoping Pole 1. Open the assembly lock on the telescoping pole, and push the chain saw head into the opening on the end of the pole (Fig.
-
Page 14: Operation
3. To remove the chain saw head, release the On/Off switch and remove the battery. Unlock the assembly lock. Fig. 16 Push the lock tabs on both sides, and pull the chain saw Pull Pull head out (Fig. 13). Operation Starting and Stopping 1. -
Page 15: Adjusting The Auxiliary Handle
3. Re-assemble the auxiliary handle lock knob and the bolt Back Side Fig. 19 on (Fig. 21). Fig. 21 Rotating button Front Side Rotating button To Adjust the Position of the Auxiliary Handle 1. Disconnect the saw from the power supply by removing the battery from the compartment. - Page 16 To Adjust the Angle of the Auxiliary Handle CAUTION! The chain will continue to run for several 1. Stop the saw by releasing the On/Off switch. seconds after turning off the tool. 2. The auxiliary handle can be adjusted in -45°, 0°, 45°. Do not use the pole chain saw under wet conditions.
- Page 17 • The most typical cutting application is to position the • Do not put pressure on the saw at the end of the cut. unit at an angle of 60° or less depending on the specific Pruning situation (Fig. 26). As the angle of the pole chain saw shaft to the ground increases, the difficulty of making the first Pruning is the process of trimming limbs from a live tree.
-
Page 18: Maintenance & Care
(right or left). To maintain optimal blade sharpness and peak performance, Sun Joe recommends model 24V-CSSHRP-LTE Cordless • To move the chain forward, use a screwdriver. Chain Saw Sharpener, available on sunjoe.com, by phone at... -
Page 19: Chain Sprocket
• Turn the bar over in the vise and repeat on all the other • bent guide bar cutting edges. • cracked or broken rails • Check that the depth limiter tooth does not stick out • spread rails farther than the inspection tool and file any projecting Turn the saw over, check the underside of the guide bar, and parts with a flat file, rounding off the edges (Fig. -
Page 20: Troubleshooting Tips
• The chain is too tight; re-tension. the chain what to do, then have the saw inspected by an authorized speed is Snow Joe + Sun Joe dealer or call the Snow Joe ® ® ® Sun Joe customer service center at 1-866-SNOWJOE ®... -
Page 21: Fitting The Safety Guard
Connecting to the Telescoping Pole Grass Trimmer + Edger 1. Open the assembly lock on the telescoping pole, and push the grass trimmer + edger head into the opening on the end of the pole (Fig. 34). Assembly Grass trimmer Fig. - Page 22 Operation 3. Lock the pole in position by closing the telescoping lock (Fig. 39), and ensure that the pole is secured. Starting and Stopping Fig. 39 1. Slide the battery into the battery compartment until it clicks to lock into position (Fig. 36). Fig.
- Page 23 Adjusting the Multi-Angle Head NOTE: It's recommended to not remove the auxiliary handle when operating the grass trimmer + edger for better The grass trimmer + edger head can be rotated for 5 different maneuverability and easier operation. cutting angles for 0°, 15°, 30°, 45° and 60°. Follow the below To Adjust the Position of the Auxiliary Handle instructions to adjust angles.
-
Page 24: Operation Tips
Operation Tips To convert the unit, follow the instruction below: 1. To convert the grass trimmer to an edger, slide the • Wear non-slip gloves for maximum grip and protection. converting switch on the trimmer head up, meanwhile turn • For the best cutting action against walls, fences, and in the lower part of the trimmer head to the side until the high grass, move the grass trimmer slowly so grass is cut trimmer head is locked into position (Fig. - Page 25 CAUTION! Always wear eye protection. Fig. 52 1. Hold the trimmer at an angle of approximately 10 – 30 degrees to the work area (Fig. 49). Fig. 49 Edging wheel Advancing Lines 10º – 30º NOTE: Your trimmer uses 0.055 in. (1.4 mm) diameter nylon line to cut grass and weed quickly and easily.
-
Page 26: Winding The Line
Fig. 54 Winding the Line NOTE: A factory wound spool (model GTS4002C-RS-6PK) is available for easy spool replacement on the GTS4002C Spool cordless grass trimmer + edger. Visit sunjoe.com to purchase this accessory online. Should you wish to wind the line yourself, the instructions are provided below. - Page 27 NOTE: Always replace the spool with a new pre-wound spool. tightly (Figs. 57 – 58). Visit sunjoe.com to purchase the pre-wound spool (model GTS4002C-RS-6PK) for this cordless grass trimmer + edger. Fig. 57 IMPORTANT: Keep all areas of the cutting head and cutting head cover clean.
-
Page 28: Pole Hedge Trimmer
Operation Pole Hedge Trimmer Starting and Stopping Assembly 1. Slide the battery into the battery compartment until it clicks to lock into position (Fig. 62). Connecting to the Telescoping Pole Fig. 62 The hedge trimmer head comes fully assembled. To use the machine as a pole hedge trimmer, connect the hedge trimmer head with the telescoping pole as indicated below. - Page 29 3. Lock the pole in position by closing the telescoping lock To Adjust the Position of the Auxiliary Handle (Fig. 65), and ensure that the pole is secured. 1. Disconnect the hedge trimmer from the power supply by removing the battery from the compartment. Fig.
-
Page 30: Before Operation
Adjusting the Multi-Angle Head Cutting Tips The hedge trimmer head can be rotated for 10 different cutting WARNING! Always hold the pole hedge trimmer with angles for -45º, -30º, -15º, 0º, 15º, 30º, 45º, 60º, 75º, and 90º. both hands. Never hold shrubs with one hand and operate the Follow the below instructions to adjust angles. -
Page 31: Care & Maintenance
CAUTION! Do not use the pole hedge trimmer for Fig. 71 cutting stems greater than 0.6 inch (1.5 cm) thick. Use the pole hedge trimmer only for cutting normal shrubbery found around houses and buildings. Do not force the pole hedge trimmer through dense growth. A slight back and forth sawing action may ease the cutting of larger, more dense growth. -
Page 32: Model + Serial Number
• If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the If your Sun Joe iON GTS4002C cordless lawn + garden ® groundwater and get into the food chain, damaging your multi-tool system requires service or maintenance, please call health and well-being. - Page 33 Optional Accessories WARNING! ALWAYS use only authorized Snow Joe + Sun Joe replacement parts and accessories. NEVER use ® ® replacement parts or accessories that are not intended for use with this cordless garden tool system. Contact Snow Joe ®...
- Page 34 NOTES...
- Page 35 NOTES...
- Page 36 SNOW JOE + SUN JOE CUSTOMER PROMISE ® ® ABOVE ALL ELSE, Snow Joe, LLC (“Snow Joe”) is dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a Snow Joe...
- Page 37 sunjoe.com...