CHARGE / START DEVICE ПУСКО-ЗАРЯДНОЕ УСТРОЙСТВО 300A ВЫШЕ START CHARGE REPAIR РЕЖИМ PO220-300A 765 Вт ВОССТАНОВЛЕНИЕ АККУМУЛЯТОРА НИЖЕ 1. Over Heating Light 2. Button to change the mode of charging, start, and repair 3. Button to increase the Charging / Starting Current 4.
Page 5
START CHARGE REPAIR РЕЖИМ CHARGE PO220-300A 765 Вт ВОССТАНОВЛЕНИЕ АККУМУЛЯТОРА НИЖЕ ①Press the “MODE” button to adjust the model to “CHARGE”. ②The C place on the screen means preset charging current. It could be adjusted by pressing “UP” or “DOWN” button ③Connect the red clamp to the battery’s positive polarity and black clamp to the battery’s negative polarity, then charger...
CHARGE / START DEVICE OPERATING INSTRUCTION 1.Before charging, please check whether the rated voltage of batteries matches to output voltage of charger or not. 2. Turn on the machine 3. Make sure that the Clamp and appliance are connected. 4. The machine has the function of auto-identification of battery’s voltage. 5.
Page 9
ÏÓÑÊÎ-ÇÀÐßÄÍÎÅ ÓÑÒÐÎÉÑÒÂÎ Ïîçäðàâëÿåì Âàñ! Вы выбрали электроинструмент компании P.I.T. Все наши технические разработки, опыт производства и постоянная модернизация инструментов делают электроинструмент P.I.T. надежным помощником в решении Ваших строительных задач. Áëàãîäàðèì Âàñ çà ýòîò âûáîð!
Need help?
Do you have a question about the PO220-300A and is the answer not in the manual?
Questions and answers