Product Assembly - KitchenAid 5KSMVSA Product Manual

PRODUCT ASSEMBLY

ASSEMBLING THE FRESH PREP
SLICER/SHREDDER
ATTACHMENT
1.
Turn the Stand Mixer OFF(0) and unplug.
2.
Slide the Blade you want to use into the
Housing. You will hear a click when the
Blade snaps into place properly on the
drive shaft.
3.
For Stand Mixers with a hinged
attachment hub cover: Flip up to open.
6
4.
For Stand Mixers with a removable
attachment hub cover: Turn the
Attachment Knob counterclockwise to
remove attachment hub cover.
5.
Insert the attachment Shaft Housing into
the attachment hub, making certain the
power shaft fits into the square hub
socket. If necessary, rotate the
attachment back and forth. The pin on the
Attachment Housing fits into the notch of
the hub rim when in the proper position.
6.
Tighten the Stand Mixer attachment hub
knob until the attachment is completely
secured to the Stand Mixer. Make sure
that the hub knob is properly seated in the
retention hole in the attachment.