Page 3
Informative alerts hot and cold loads as it will monitor notify you of any temperatures from -58°F to +257°F. important events. Anytrek is driven to be a leading pioneer of innovative technologies Set maintenance and solutions for the trucking reminders by industry.
Page 4
Part II:Install ThermoTrack (Suitable for 4-inch mounting hole) Step 1. Insert sensor Sensor Sensor Thermowell Fix the sensor with the fixing clip...
Page 5
Part II:Install ThermoTrack (Suitable for 4-inch mounting hole) Step 2. Insert insulation foam Insulation foam Thickness not less than 2 inches 1.Run the sensor connector through the hole. 2.Keep no space gap to ensure insulation. Step 3. Install hole adaptor panel Pay attention to the orientation Keep these two holes up Use four rivets provided at the holes pointed by arrows.
Page 6
Part II:Install ThermoTrack (Suitable for 4-inch mounting hole) Step 4. Install flange holder Keep “TOP” pointing up Use three rivets provided at the holes pointed by arrows. Step 5. Connect the sensor Step 6. Fix the main unit. Fix the main unit with four screws provided.
Safety Information Lithium-ion Battery User’s Guide This device contains a Lithium-ion battery. Please read the manual carefully before using it in order to ensure proper use of the battery. Misuse or abuse of the lithium-ion battery may result in personal injury or fire. The power of the lithium-ion battery will be above 90% when you receive the device, however, the power will be depleted in a very slow process.
Page 8
USA Offices West Coast: 4425 E. Airport Dr., Suite 106, Ontario, CA 91761 East Coast: 1554 B, Hwy. 80 East, Pooler, GA 31322 +1 (844) 872-6987 info@anytrek.com Canada Office 11535 1st Avenue, Suite 309, Saint-Georges, Québec, G5Y 7X3 +1 (418) 425-3535 info@anytrek.ca...
Need help?
Do you have a question about the ThermoTrack VT2002 and is the answer not in the manual?
Questions and answers