1. Manuals
  2. Brands
  3. Menards Manuals
  4. Motorcycle Accessories
  5. PERFORMAX AntFi X60-2
  6. Operator's manual

Menards PERFORMAX AntFi X60-2 Operator's Manual

Auto-darkening welding helmet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Auto-Darkening
Welding Helmet
242-1487
OPERATOR'S MANUAL
CAUTION:
To Reduce The Risk Of Injury, User Must Read And
Understand Operator's Manual. Save These Instructions For Future Reference.
© 2020 Menard, Inc., Eau Claire, WI 54703
06/2020
Customer Service: 1-855-692-6872 Distributed by Menard, Inc. Eau Claire, WI 54703

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PERFORMAX AntFi X60-2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Menards PERFORMAX AntFi X60-2

  • Page 1 Auto-Darkening Welding Helmet 242-1487 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. © 2020 Menard, Inc., Eau Claire, WI 54703 06/2020 Customer Service: 1-855-692-6872 Distributed by Menard, Inc. Eau Claire, WI 54703...

  • Page 2: Table Of Contents

    SAFETY SYMBOLS TABLE OF CONTENTS Page 1 SAFETY SYMBOLS Page 4 TECHNICAL SPECIFICATIONS Page 5 OVERVIEW Read and understand this entire instruction manual before attempting to assemble,install, operate OPERATION Page 6 or maintain this tool. Failure to comply with the instructions may result in serious personal injury and/or property damage! SELECT THE SHADE NUMBER Page 6...

  • Page 3: Safety Symbols

    SAFETY SYMBOLS SAFETY SYMBOLS ARC RAYS can burn eyes ! FLYING METAL can injure eyes ! Never look at arc welding without proper eye protection. Arc rays from the • Welding, chipping, wire brushing, and grinding cause sparks and flying metal. welding process produce intense visible and invisible (ultraviolet and infrared) As welds cool, they can throw off slag.

  • Page 4: Technical Specifications

    TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS ADF Model AntFi X60-2 Viewing Area 98mm x 44mm/3.86" x1.73" Cartridge Size 110 x 90 x9mm /4.33" x 3.54" x 0.35" • When stored in extremely cold temperature, the helmet should be warmed up to ambient Inner cover lens 99.3 x 45.4 x 1mm/3.91"x1.79"x0.04"...

  • Page 5: Operation

    OPERATION SELECT DELAY TIME ADJUST THE WELDING HELMET Fig.5 Fig.3 This welding helmet featured with ACCORDING TO YOUR continuously adjustable delay time control. INDIVIDUAL REQUIREMENTS. The lens will lighten in 0.1 to 1.0 seconds upon ambient temperature shade The headband should be adjusted both in setting.

  • Page 6: Pre-Welding Check & Battery Testing

    PRE-WELDING CHECK & BATTERY TESTING MAINTENANCE Detach the cartridge from the shield and put Remove protective film on the new inner The following procedures should be followed i t a s i d e . R e m o v e t h e o l d l e n s c o v e r . lens cover, feed one side of the lens cover to perform this testing: Remove the protect film on the new lens...

  • Page 7: Insert The Magnifying Lens

    INSERT THE MAGNIFYING LENS NOTES 1)Magnifying lens is sold separately. Fig.15 2)Insert the magnifying lens into the slot from the bottom to the top(Fig.15). INSPECTION 1.Carefully inspect your Auto-Darkening THE LENS STAYS DARK AFTER THE WELD ARC IS EXTINGUISHED, OR THE Welding Filter regularly.
  • Page 8 NOTES Auto-Darkening Welding Helmet WARRANTY 2-YEAR LIMITED WARRANTY The welding helmets are warranted against defects in materials and workmanship for a period of two (2) years from date of purchase. This warranty is limited to the repair or replacement of items which are not in compliance with this warranty.

Table of Contents