Transpo SonoBlaster SBII Operation Manual

Warranty
The following warranty is made in lieu of all other warranties, either expressed
or implied. This product is manufactured of selected materials by skilled
technicians. Neither seller nor manufacturer has any knowledge or control
concerning the purchaser's use of either product and no warranty is made as to
the results of any use. The only obligation of either seller or manufacturer shall
be to replace any quantity of this product that proves to be defective. Neither
seller nor manufacturer assumes any liability for injury, loss or damage resulting
from the use of this product.
®
SonoBlaster!
is protected by Patents 6,075,450 & 6,357,382
®
SonoBlaster!
is a registered trademark licensed to Transpo Industries,
Inc. ©2008
®
SonoBlaster!
FHWA NCHRP­350 Accepted
Category II Safety Device
HSA­10 / WZ­131
www.transpo.com/sonoblaster.htm
1/16/08
20 Jones Street New Rochelle, NY 10801
Phone: 914.636.1000 Fax: 914.636.1282
info@transpo.com
Work Zone Intrusion Alarm
Operation Manual
Model SBII
A New Concept in Work Zone Intrusion Protection
®
The SonoBlaster! Work Zone Intrusion Alarm is an impact activated safety
alarm that alerts both roadway workers and errant vehicle drivers at the same
time to help reduce crashes and injuries in our nation's highway work zones.
The SonoBlaster mounts on standard work zone barricades such as traffic cones,
drums, and delineators. Upon impact by an errant vehicle, the SonoBlaster's
built­in CO ­powered horn blasts at 125 decibels (dB) to signal workers that
2
their protective zone has been violated allowing them critical reaction time to
move out of harm's way.
The SonoBlaster's loud alarm sound can also alert distracted or drowsing
drivers allowing them to steer out of the work zone or brake prior to reaching
workers or construction equipment, addressing a major cause of work zone
crashes.
®
SonoBlaster!
FHWA NCHRP­350 Accepted
Category II Safety Device
HSA­10 / WZ­131
www.transpo.com