Advertisement
Removal and Shipping Instructions for the
Radiant Heater RH600
1
Removal of Radiant Heater RH600
1.1
Removal of RH600 from the Dräger wall or stand mount
The RH600 is heavy, please ask a second person for assistance.
• Unscrew the 4 screws with spring washers and remove the RH600.
• Please send the screws and washers with the RH600.
1.2
Removal of RH600 from a Dräger Babytherm 8000 OC:
• Unscrew 3 screws and remove cover plate from the Babytherm 8000 OC.
Radiant Heater RH600
Removal and Shipping Instructions
Dräger Medical, Inc.
August 21, 2000
1/3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Dräger Medical RH600
- Page 1 Removal of RH600 from the Dräger wall or stand mount The RH600 is heavy, please ask a second person for assistance. • Unscrew the 4 screws with spring washers and remove the RH600. • Please send the screws and washers with the RH600.
- Page 2 Dräger Medical, Inc. The RH600 is heavy, please ask a second person for assistance. • Unscrew the 4 screws with washers and remove the RH600. • Please send the screws and washers with the RH600. • Assemble cover plate with the 3 screws.
- Page 3 • If you cannot provide an adequate shipping box please contact Customer Service at 1 800 4 DRAGER and ask for special shipping box with the P/N SD6 for the RH600. We will send you this box free of charge.
Need help?
Do you have a question about the RH600 and is the answer not in the manual?
Questions and answers