Table of Contents
Advertisement
Using the DSmobleSCAN icon on your desktop
An icon (
) will appear on your desktop after DSmobileSCAN software
installation. Using this icon will initiate the DSmobileSCAN software but unless
DSmobileSCAN is set as your default it will put it in a "manual" mode which requires
the user to click on the green "SCAN" button to initiate the scan.
If you have chosen DSmobileSCAN as your default scanning software, pressing the
button on the top of the scanner after DSmobileSCAN has been launched from the
icon will start the scan process.
If you have not chosen DSmobileSCAN as your default scanning software, pressing the
button on the top of the scanner after DSmobileSCAN has been launched from the
icon will display the "select the program to launch for this action" window. You can
now choose another program from the menu. Although the DSmobileSCAN window
will show in the background, it will not interfere with the other scanning application
you choose. To close the DSmobileSCAN window, you must click on the delete "X" at
the top of the DSmobileSCAN screen. Closing the DSmobileSCAN window will not
interfere with your current software application.
If you want to use DSmobileSCAN as your default scanning software, Pentax
recommends that you don't use the desktop icon, just press the button on the scanner,
select DSmobileSCAN, click on "Always use this program for this action," and click
OK. From then on you can scan by pressing the button on the scanner twice.
- 9 -
Hide quick links:
Advertisement
Table of Contents
