WEG CFW100 - IOADR Installation, Configuration And Operations Manual page 12

Infrared Remote Control and I/O
Expansion Module
NOTE!
When the NTC sensor is not connected to the
accessory, the CFW100 frequency inverter will
show 999 °C (1830 °F) in parameter P375.
If pins 6 and 7 (accessory connector) are
short circuited, the value shown in P375 will
be 0 °C (32 °F).
ATTENTION!
Some keys of the remote control have different
functions according to the operating status
of the CFW100 frequency inverter when the
user application (P903 = 0) is installed and it
is running (P900 = 4).
12 | CFW100