LifeSafety Power ADC-AC-LP1501-PSE Quick Manual

Advertisement

Description

The ADC-AC-LP1501-PSE is a single door access control
unit featuring dual voltage power, an ADC-AC-LP1501 con-
troller, and a preinstalled adapter plate for an ADC-ACX1
single door reader board, housed in a 12"x14"x 4.5" metal
enclosure with battery space.

Equipment List

1. Power Supply 24VDC / 3A (model: FPV4)
2. Secondary 12V supply (model: B100)
3. ADC-AC-LP1501 controller
4. Mounted ADC-ACX1 expansion back plate
5. ADC-ACX1 mounting hardware
6. AC power cord

System Operation

The FPV4 power supply converts AC primary power to 24VDC for charging the battery set and powering the B100, locking
device(s), and 24V auxiliary devices. The B100 is powered from the FPV4 Auxiliary terminals and steps the 24V down to
12V to power the ADC-AC-LP1501 controller, reader(s), and any 12V auxiliary devices.
The battery set is charged by the red/black harness on the bottom edge of the FPV4. The battery set MUST be two 12V
batteries in series for a 24V battery set. Observe polarity or damage to the system will occur.
Positive lock power is prewired to the ADC-AC-LP1501 lock relay terminal 1C. The lock positive should be wired to the
NC (Fail Safe) or NO (Fail Secure) terminal as appropriate. The lock negative should be wired directly to the FPV4 DC OUT
(-) terminal to minimize noise and surges in the system.

Terminal Output Ratings

**Max currents listed are for individual terminals - total current at 12V and 24V not to exceed max rating of supply
Board
Terminal
DC OUT
FPV4
AUX OUT
DC OUT
J2 (DC OUT)
B100
J5 (DC OUT)
J1 (DC IN)
J4 (DC IN)
VO
ADC-AC-LP1501
1-C (NO or NC)
April 2020
Voltage
Max Current**
24V
1.5A
24V
0.75A
12V
1.5A
12V
1.5A
12V
1.5A
24V
0.75A
24V
0.75A
12V
0.65A
24V
1.5A
1/2
ADC-AC-LP1501-PSE
QUICK GUIDE
ADC-ACX1 or
ADC-AC-LP1501
Accessories included
• AC power cord
• Battery harness
• Bracket mounting hardware
Notes
Output can be switched by FAI Input on FPV4
Max Current includes current drawn by B100
For additional 12V devices
For additional 12V devices
For additional 12V devices
For additional 24V devices
For additional 24V devices
Max Current includes reader current draw
Switched Lock Output - Ground at FPV4 DC OUT (-) Terminal
040220_rev3
Bracket for
www.lifesafetypower.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADC-AC-LP1501-PSE and is the answer not in the manual?

Questions and answers

Summary of Contents for LifeSafety Power ADC-AC-LP1501-PSE

  • Page 1 040220_rev3   Description The ADC-AC-LP1501-PSE is a single door access control unit featuring dual voltage power, an ADC-AC-LP1501 con- troller, and a preinstalled adapter plate for an ADC-ACX1 single door reader board, housed in a 12”x14”x 4.5” metal ...
  • Page 2 LifeSafety Power’s only obligations are those Libertyville, IL 60049 USA in the LifeSafety Power Standard Terms and Conditions of Sale for this product, and in no case will LifeSafety Power or its www.lifesafetypower.com...

Table of Contents