Fisher-Price Octonauts Gup Speeders Speedway CJJ12 Instructions

TRACK LAYOUT
NOTE:
Be sure the track curves to the RIGHT and not to the LEFT in order for the shark feature to work correctly.
! NOTE:
DO NOT ATTEMPT TO PULL MOUNTING BASE OFF OF WALL WITHOUT READING THE FOLLOWING REMOVAL INSTRUCTIONS!
To remove WALL PLATE from wall:
NOTE: You can remove the WALL PLATE from the MOUNTING BASE in between play sessions, but do not remove the MOUNTING BASE from the wall.
front view side view
Pull the WALL PLATE gently from the bottom to unsnap the MOUNTING BASE from the WALL PLATE.
To remove MOUNTING BASE permanently from wall:
IMPORTANT NOTE:
!
Do not remove the MOUNTING BASE from the wall in between play sessions.
Remove only the WALL PLATE from the MOUNTING BASE in between play sessions.
Once the MOUNTING BASE is removed from the wall, it cannot be re-attached using the same Command® Strip.
NEVER pull the Command® strip towards Hold the MOUNTING BASE gently to Stretch straight down along wall at least
you (as shown). prevent the base from snapping 12 inches (30 cm) until MOUNTING BASE
your fingers. and the strip release.
CONSUMER ASSISTANCE
1-800-432-5437 (US & Canada)
1300 135 312 (Australia)
Fisher-Price, Inc., 636 Girard Avenue, East Aurora, NY 14052.
Hearing-impaired consumers: 1-800-382-7470.
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Mattel Europa B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand: 16-18 William Pickering Drive,
Albany 1331, Auckland.
Keep these instructions for future reference as they contain important information.
G x 2
OCTONAUTS™ OCTOPOD™ Meomi Design Inc.
OCTONAUTS Copyright © 2015 Vampire Squid Productions Ltd,
ADULT ASSEMBLY REQUIRED.
a member of the Silvergate Media group of companies. All rights reserved.
©2015 Mattel. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, except as noted.
PRINTED IN CHINA. Mattel East Asia Ltd., Room 503-09, North Tower,
World Finance Centre, Harbour City, Tsimshatsui, HK, China.
3M and Command are trademarks of 3M. © 3M 2015. All Rights Reserved.
CJJ12
1100383434_DOM NOTE:
Only apply Command® Strip to surfaces above 50°F (10°C).
Adhesive could lose adhesion above 105°F (40°C).
Gup Speeders Gup Speeders
Speedway Speedway
INSTRUCTIONS
WHAT'S INCLUDED
A x 2
C x 2 D E
H I J K
No tools required for assembly.
IMPORTANT: Failure to follow instructions carefully may cause damage to your wall!
SAVE INSTRUCTIONS for damage-free removal or visit command.com
CAUTION:
DO NOT use with wallpaper. May not adhere well to vinyl surfaces.
DO NOT use for antiques, heirlooms, or other valuable or irreplaceable items.
DO NOT hang items over beds.
B
F
L