Table of Contents
Advertisement
Power On/Off switch position
17.
5. Flameproof structure
„
Completely consider the explosive air getting into ex-proof structure, which may lead to
explosion because of some reason and to confirm and ensure camera explosion proof
performance based on its structure gap, length and max temperature it will get to.
„
Enclosure shall burden water pressure testing for 1.0Mpa for 10~12 seconds without
leakage as pass, which is ordered in GB3836.2-2000.
„
Camera surface temperature max shall not over 80℃ while it is working.
„
The lead to equipment is with the method of turn tight the screw.
„
Window glass adopts steel glass to burden Impact and Heat change testing.
„
Window glass adopts steel glass to burden Impact and Heat change testing.
Front Panel
Tempered Glass
Base
Flameproof joint position picture
18.
SVEX-171（Ex）EX Monitor
Ver: 1.1
17" LCD screen
Flameproof
Interface
Housing
13
Advertisement
Table of Contents
