Pentax Optio P80 Operating Manual page 104

1
Press the four-way controller (4)
3
in A mode.
The [Flash Mode] screen appears.
The flash mode changes each time the
button is pressed. You can also change the
setting using the four-way controller (23).
2
Press the 4 button.
The setting is saved and the camera returns to capture status.
About the red-eye phenomenon
Taking pictures using the flash may cause the subject's eyes to appear red in
the resulting picture. This phenomenon occurs when the light from the flash is
reflected in the subject's eyes. It can be reduced by illuminating the area around
the subject or moving closer to the subject and zooming out to a wider angle.
Setting the flash mode to c or d is also an effective way of reducing red eyes.
If the subject's eyes appear red despite such precautions, they can be corrected
by the red-eye compensation function (p.166).
Saving the Flash Mode setting 1p.127
102
Four-way controller
4 button
Flash Mode Flash Mode Flash Mode
Auto Auto Auto
Cancel Cancel Cancel OK OK OK
MENU OK