Table of Contents
Advertisement
Installing the Software
The procedures for installing the necessary software are explained.
If you are using Windows 2000 or Windows XP, please login as an
administrator user before starting installation. Refer to your PC's
operating manual for instructions on how to login.
Installing the USB Driver
1
Turn on your computer.
2
Insert the CD-ROM (S-SW20) into your CD-ROM drive.
The PENTAX Software Installer screen is displayed on the
desktop.
• When the PENTAX Software Installer screen is not displayed
Display the PENTAX Software Installer screen following the steps
below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM Drive (S-SW20)] icon.
3) Double-click [Setup.exe].
3
Click your applicable
language.
You can choose the languages from
the displayed screen.
A selection screen to install your
desired software is displayed.
4
Click [USB Driver] on the
Software Installer screen.
The InstallShield Wizard screen will
appear.
Follow the instruction on the screen.
Complete InstallShield Wizard
screen will appear.
6
Advertisement
Table of Contents
