Maxwell 25818 - Non-Contact AC Voltage Detector LED Light Manual

Description

The device is ideal for detecting AC Voltage around the power outlets, cables, circuit brakers and wires.

• Safe, detection without connection
• LED indicator light and tone sign when voltage is on
• Comfortable pen shape and design, easy storage in pockets
• LED work light

Usage

Hold the tip close to the power outlet, when the voltage is detected in the measured range the LED will light up red and the tool will beep repeatedly.

1. Detector Tip
2. LED Work light
3. Control Light
4. LED Work Light Push-Button
5. Battery Compartment Opening Button

Replacing the battery

Press the battery compartment opening button and slide it towards the front of the device. Replace the battery then slide the battery compartment lid back to its place.

Specification

Operating Temperature: -10°C - +50°C

Voltage Range: 60 V – 1000 V (AC 50/60 Hz)

Safety Category Rating: CAT IV 1000 V

Battery: 2 x AAA batteries

Size: 150 x 20 x 27 mm

Weight: 30 g

Warnings

• Use the device just only within the voltage range, the detector does not detects above or below the range. This device will not detect the presence of DC voltage.
• Separate every cable from each other to get the perfect measures.
• From additional sources and devices can cause interference which cause to false measurements.
• Do not measure screened conductor.
• Do not use the device if it is damaged.
• To avoid electric shock use the device appropriately and carefully following the guidelines.