SolarMax INM Series Installation Instruction Manual

INM Series LED HIGH MAST LIGHTING
INSTALLATION INSTRUCTION GUIDE
• To avoid the possibility of electric shock, turn off power supply before installation/servicing.
• Inspect this properly packaged product for any damage that may have occurred during transit.
• Verify product application complies with manufacturer design recommendations.
• Verify the availability of necessary tools and incidental material.
• Verify applicable code requirements. Field assembly and installation are subject to acceptance by local inspection authority.
• Appropriate safety equipment to be determined by end user, per applicable safety standards and precautions.
• SolarMax LED is not responsible for any damages caused by parts/components that are not supplied by SolarMax LED.
1
1

STEP 1

Fixture body adjustable angle: -5°, 0°, +5°
3

STEP 3

Tools and accessories
Torque Wrench
Cross Screwdriver
Wrench
Lamp Pole Fixing Bracket
www.solarmaxled.com
led@solarmaxtech.com
T: 951-300-0788 ■ F: 909-595-7388
3080 12th St., Riverside, CA 92507

IMPORTANT SAFEGUARDS

Read these instructions completely and carefully before proceeding
with installation or service maintenance of this product:

Adjustable Angle Installation

Screw
Hoop
Outer Hex Bolt
Flat Gasket
Spring Washer
2
ST E P 2
Fits outside diameter (OD) from 1-5/8" to 2-3/8" round pole
4
ST E P 4
Diagram of step angle
1
2-3/8" Round Pole
1-5/8" Round Pole
Hoop
© SolarMax LED, Inc. 2022. All rights reserved.
Spec Sheet is subject to change without notice.
Rev. date: 2022-11-03