jcb 66-40E Quick Reference Manual

Electric TLT

QUICK REFERENCE GUIDE
This Quick Reference Guide DOES NOT replace the Operators
Manual. You MUST read ALL the disclaimers and safety and other
instructions in the Operators Manual before initially operating this
product. Accordingly, no legal claims can be entertained based on
the data, illustrations or descriptions in this Quick Reference Guide.
BEST PRACTICES Static Dimensions
1. Carry a load as low as possible while maintaining good
visibility.
2. Forks should be tilted back when in transport – with or
without a load, cradle the load.
3. Fork tips should be on the ground when unit is parked.
Static Dimensions

Moving Machine

Lifting Machine Tie-Down Points
A. Lifting point x 4
A.
B. Padding
Cab and Switch Panel

Drive Selection Switch

Securing method
A. Ignition switch
B. Emergency stop button
C.

Instrument panel

D. LLMI
E. Cab heater control
F. Lift arm control lever
G. Switch console
H. Park brake switch
J. Seat
K. Steering wheel
L. Brake pedal
M. Accelerator pedal
N. Diagnostic connector
P. Load chart
Q. Power socket
A. Drive selection switch
F = Froward
N = Neutral
R =Reverse
Revision 1.0
1/6/2021
Instrument Panel
A.

Warning and notification symbols

B.

Display screen

Home Screen

A. Dynamic information screen
B.

Battery level status

C.

Drive selection

D. Battery percentage
E.

Menu navigation

Interlocks Screen
In order for machine to start:
Operator seated
•
Park brake applied
•
Machine in neutral
•

Start Up Sequence

Access additional information
www.servicepro.jcb.com