Advertisement
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for
9
safe handling and control of the tool in unexpected situation.
Hold the tool by insulated gripping surfaces only.
9
2. INTRODUCTION
Brushless powerful router suitable for edge forming, trimming, decorative work and slot cutting. Lightweight composite housing
for comfortable use. Variable 5-speed control from 12000-28000rpm. Adjustable stroke length of 0-35mm. Supplied with router
section, router guide, straight guide, spanners (x2) and 1/4" 6mm collet. Built-in dual LED worklights for increased visibility and
accuracy. Plunge base available separately. Requires compatible 20V battery and mains charger, sold separately.
3. SPECIFICATION
Model no.: ..................................................... CP20VTR
Collect Capacity/Size: .................................1/4" or 6mm
Noise Power/Pressure: ................................ 89/78dB(A)
No-Load Speed: .................................. 12000-28000rpm
Optional Router Plunge Base: ............................ RPB01
Stroke Length: ................................................... 0-35mm
Vibration/Uncertainty: ................................... 5.6/1.5m/s²
Battery: ....CP20VBP2, CP20VBP4, CP20VBP6 (not supplied)
4. CONTENTS
Battery Indicators
Power Switch
Body
Height Adjustment
Knob
Shaft Lock Pin
fig.1
5. OPERATION
WARNING! Always be sure that the tool is switched off and the battery is removed before carrying out any work on the tool.
‰
5.1.
INSTALLING OR REMOVING ROUTER BIT. (fig3)
NOTE: DO NOT tighten the collet nut without inserting the bit. The collet cone may break.
5.1.1.
Insert the router bit all the way into the collet cone. Depress the shaft lock to engage spindle. Tighten the collet nut with the wrench
or tighten the collet nut securely with the two wrenches. To remove the bit, follow the installation procedure in reverse.
fig.3
© Jack Sealey Limited
Battery Mount
Speed Control
Lock Lever
Work Lights
(on underside)
Base
Original Language Version
fig.2
CP20VTR Issue 1 15/02/2023
Note:
See Parts list for
item details.
Advertisement
