Pentax K110D Operating Manual page 98

96
Page Setup
Sets the paper size, margins and other settings.
Item
Print Area
Layout
Description
Sets the paper size and margins.
Standard size : Sets the paper size (Photo (89 × 127 mm)/
(3.5 × 5 in.), Postcard (102 × 152 mm)/(4 × 6
in.), Photo (127 × 178 mm)/(5 × 7 in.), Photo
(203 × 254 mm)/(8 × 10 in.), Photo (254 × 305
mm)/(10 × 12 in.)). The image size for
printing is automatically adjusted according
to the selected paper size.
Scale to fit : Sets paper size according to paper used by
printer. [Margins (mm)/(in.)] can be set. The
image size for printing is automatically
adjusted according to the selected paper size
and margins. Alternatively, select [Fit to
paper] to ignore the [Margins (mm)/(in.)]
settings and adjust the image size for printing
to the maximum print area of the printer.
Margins (mm)/(in.):
Sets top, bottom, left and right margins in
units of mm or inches when [Scale to fit] is
selected.
Sets segmentation method of print area. Select from the
following two settings.
No cropping : Prints entire image. Margins are added to
sides or top and bottom depending on print
area and aspect ratio.
Cropping : Prints image without margins. Sides or top
and bottom of image may be cut depending
on print area and aspect ratio.