Yuel Beast Designs Motif Mobius Quick Start Manual

Thank you for your interest in the Motif Mobius.
This is the spiritual successor to the Monument,
with a focus on liquid cooling. The Mobius is the
approximate size and shape of a standard mid-
tower case, but features a unique open chassis
design that is unlike any other case on the market.
The chassis is a continuous strip of steel that is
contorted to accommodate components in an
eye-catching way. The motherboard and graphics
card are suspended on a pair of flanges that extend
from the outer edges of the chassis, all of which is
supported by the PSU flange.
The main chassis of the Mobius consists of 2 pieces
that are painstakingly cut, bent, welded and finished
to create a near seamless loop of steel. The chassis
features a 120mm and 240mm hole pattern for
AIO coolers, which can also be used for a custom
loop with a small pump/reservoir combo. The front
radiator cut outs, and the back of the motherboard
flange are shrouded by 2 pieces of either polished
stainless steel, or black powder coated steel.
This is a project kit designed for advanced PC
builders who have experience and familiarity with
the challenges of custom PC building. We hope this
product will be an important part of your next build
and that you will make something both useful and
captivating. Enjoy!
-Eric and Ken, Yuel Beast Designs
Yuel Beast Designs
Motif Mobius
1