Ingenium wings Center Link WW202000 Quick Start Manual

Center Link –WiFi/RF Gateway
WW202000
General description
CenterLink (ref. WW202000) is a device, which allows
to program, configure and manage the full BUSing®
Radio installation remotely via the mobile application
through the Ingenium server. This gateway can
connect via radio with all the Wings devices and
incorporates also a Wi-Fi adapter to connect with the
router of the installation or generate an access point.
Characteristics
 Required to program, configure and manage any
BUSing® Radio installation via Wings application.
 Wi-Fi connectivity for remote control via smartphone
or tablet since your iOS or Android device.
 The control applications are completely free.
 The radio communication has a range of 15 meters
approximately.
Technical information
Supply
Consumption
Mounting
Led indicator
Size
Ingenium, Ingeniería y Domótica S.L. – Parque Tecnológico de Asturias, Parcela 50 – 33428 Llanera – Asturias – España
T +34 985 118 859 – F +34 984 283 560 - ingeniumsl@ingeniumsl.com - www.ingeniumsl.com
–
V1.1
230 Vac
1,1W
Plug socket connection
Flashing 1s = Connecting
Flashing 1s/3s = Waiting IP
address
On = Connected
106 x 106 x 31 mm
Max. Distance 15 m approximately
Frequency 868 MHz
Max. power 7 dBm
Environment Operation: from -10ºC to 55ºC
temperature Storage: from -30ºC to 60ºC
range Transportation: from -30ºC to 60ºC
INGENIUM declares that ref.
WW202000, fulfils the
requirements of the directive RED
2014/53/EU.
Regulation
The full DC is available on:
http://ingeniumsl.com/pdf/DC_Cent
erLink_en.pdf
Remarks
Check that Center Link is in inclusion mode (see Quick
Guide). Check that the device to be programmed is the
desired one.
Default password: 1234567890
In order to restore factory settings, keep pressed top button
from right side (blue LED) for 15 seconds. After this time,
LED will start to blink and programming button can be
released once it stops blinking.
Depending on the mobile phone used, it might be necessary
to deactivate mobile data (working only with Wifi connection).
When the user is deleted in Wings Programming App, must
be deleted as well in the Ingenium control App.