INSTALLATION & OPERATING INSTRUCTIONS
Product Name:
1
Remove the product from its packaging.
3
Bring supply cable through spigot and feed through cable gland.
5
Close the lid and secure with latches. Tighten spigot bolts to secure to post.
Page 2 of 2
Tamlite Technical
Stafford Park 12,
Telford, Shropshire,
TF3 3BJ
+44(0)1952 292441
technical@tamlite.co.uk
Document No: V1
2
Release the two buckle latches and open the driver enclosure.
4
Connect supply cable as shown.
6
220-240V
50/60Hz
ta
IP66
IK09
-20°C to 25°C