Page 1
QUICK START GUIDE Spark R55a Mobile Phone...
Page 2
1: Start by inserting the SIM card Insert the SIM card with the gold contacts facing down and the bevelled edge on the top left as shown. Carefully slide it into the housing observing the correct orientation. If your handset displays: Enter Handset unlock code The default code is 0000 Enter SIM PIN Code...
Page 3
2: Then insert the battery 1. Open the battery cover using the thumb notches on the bottom on the cover. 2. Insert the battery as shown with the contacts located against the gold springs. 3. Press the battery down flush into the case.
Page 4
3: Finally, switch on your handset Press and hold the red key for two seconds to switch the phone on or off. For more information There are some additional resources available online for you to download. • If you want a full copy of the User Guide please download from the manufacturer’s website at zte.co.nz.
Need help?
Do you have a question about the R55a and is the answer not in the manual?
Questions and answers