NewAir NFT070GN00 Owner's Manual page 17

Problem
Code FE appears
on the digital
display
Code EH
appears on the
digital display
Code EL appears
on the digital
display
Possible Causes and Solution
• The temperature sensor malfunctioned. The
compressor will stop for 20 minutes before kicking
back on. If the compressor doesn't restart after 20
minutes, contact a customer service representative for
more information.
• The internal temperature is 10.8ᵒF (6ᵒC) higher than
the set temperature. Wait one hour for the internal
temperature to adjust to the set temperature. If the
temperature remains 10.8ᵒF (6ᵒC) higher, contact a
customer service representative for more information.
• The internal temperature is 10.8ᵒF (6ᵒC) lower than
the set temperature. Wait one hour for the internal
temperature to adjust to the set temperature. If the
temperature remains 10.8ᵒF (6ᵒC) lower, contact a
customer service representative for more information.
newair.com
17