Advertisement
Built-in Battery
This unit is equipped with a built-in lithium-
ion battery. Before using this Unit, be sure to
read the following cautions:
To avoid hazards
0
do not burn.
...
do not modify or disassemble.
...
do not expose this Unit to temperatures
...
exceeding 60 °C, as this may cause the
built-in battery to overheat, explode or
catch fire.
To prevent damage and prolong
0
service life
do not subject to unnecessary shock.
...
charge within the temperature range of
...
10°C to 35°C. Cooler temperatures require
longer charging time, or in some cases
stop charging at all.
Warmer temperatures prevent complete
charging, or in some cases stop charging
at all.
store in a cool, dry place. Extended
...
exposure to high temperatures will
increase natural discharge and shorten
service life.
keep a 30% battery level (i) if the
...
battery is not to be used for a long period
of time.
In addition, fully charge and then fully
discharge the battery every 6 months, then
continue to store it at a 30% battery level
(i).
remove the AC adapter from the unit when
...
not in use, as some machines use current
even when switched off.
do not drop intentionally or subject to
...
strong impact.
EN
4
Recording Medium
Be sure to follow the guidelines below
0
to prevent corruption or damage to
your recorded data.
Do not bend or drop the recording
0
medium, or subject it to strong pressure,
jolts or vibrations.
Do not splash the recording medium
0
with water.
Do not use, replace, or store the
0
recording medium in locations that are
exposed to strong static electricity or
electrical noise.
Do not bring the recording medium near
0
objects that have a strong magnetic field
or that emit strong electromagnetic
waves.
Do not store the recording medium in
0
locations with high temperature or high
humidity.
Do not touch the metal parts.
0
When erasing data using the camcorder,
0
the data won't be erased completely.
When handing over your camcorder and/
or SD card, you are recommended to erase
all of the data by either performing
"FORMAT" or "FACTORY PRESET"
operation on this unit, using commercially
available software, or by physically
destroying the camcorder.
LCD Monitor
To prevent damage to the LCD monitor,
0
DO NOT
push it strongly or apply any shocks.
...
place the camcorder with LCD monitor on
...
the bottom.
To prolong service life
0
avoid rubbing it with coarse cloth.
...
While the LCD monitor screen has more
than 99.99% effective pixels, 0.01% of the
pixels may be bright spots (red, blue,
green) or dark spots. This is not a
malfunction. The spots will not be
recorded.
Advertisement
