Download Print this page

Toku TAG-40FLH Maintenance Instruction

Air angle grinder

Advertisement

Quick Links

MAINTENANCE INSTRUCTIONS
TAG- 40FLH
MODEL
AIR HOSE AND HOSE CONNECTION :
"WARNING"
1. ALWAYS USE APPROVAED EYE PROTECTION WHEN OPERATING THIS TOOL.
2. ALWAYS DIRECT EXHAUST AWAY FROM YOURSELF AND OTHERS IN THE TOOL.
3. DAILY-BEFORE USING TOOL, WITH NO WHEEL, CHECK SPINDLE SPEED. NEVER OPERATE FASTER THAN RATED SPEED.
4. ALWAYS USE ACCESSORIES IN GOOD CONDITION RATED AT OR ABOVE SPINDLE SPEED.
MENTS SECURELY.
5. ALWAYS USE APPROVED DUST MASK.
6. ALWAYS DISCONNECT TOOL WHEN NOT IN USE.
LUBRICATION
To flush out gum and dirt :
1. Daily before and after each shift, pour a liberal quantity of gum
solvent oil into air line.
2. Connect tool to air line. Operate tool.
3. Repeat procedure before storing.
4. Monthly, check oil in impact unit. This tool holds approximately
1/3 oz. of SAE #30 oil.
AIR SUPPLY
(minimum requirements)
1. Compressor/5hp, 20CFM at 90 psig (0.6MPa), 40 gal air tank.
2. ( See diagram above for Pipe, Hose and Fitting size. )
3. When using two or more hoses, all except leader hose should be When replacement parts are required, order Part No. and Description in the
1/2"I.D. or larger.
FOR BEST OPERATION : Supply tool with 90psig(0.6MPa) of clean,
dry air. Higher pressure drastically reduces tool life and can void
warranty.
SPECIFICATION
Wheel Size
Type No.
(mm)
(in)
TAG-40FLH
1
100X6X15.9 4X
TAG-40FRH
sales@air-allied.com.au
AIR ANGLE GRINDER
40FRH
OPERATING INSTRUCTIONS
Max Free
Height
Speed
(r.p.m)
(mm)
5
12,000
/
X
/
90
4
8
Air & Allied Sales (Pacific) Pty Ltd
TOKU PNEUMATIC PRODUCTS
LOSS OF POWER/ERRATIC ACTION
1. Reduced compressor output.
2. Excessive drain on air line.
3. Moisture or restricted pipe, hose or fittings.
4. Improper size or poor condition of pipe, hose or fittings.
5. Dirt or gum deposits cut tool power. To correct this, check and clean
air strainer, then repeat lubrication procedure.
in order, disassemble tool, replace worn or damaged parts, clean, assemble
and lubricate. )
REPLACEMENT PARTS
Always use GENUINE TOKU TOOLS Replacement Parts.
Parts List.
SOUND LEVEL
Sound Level dB(A) in accordance with ISO15744 : Pressure 91.6
Net
Weight
(in)
(kg)
(lb)
(mm)
1.6
3.5
213.5
19
3-
/
32
1.8
4.0
217.5
www.air-allied.com.au
TIGHTEN SPINDLE ATTACH-
(possible causes)
( If outside conditions are
Power 102.6
Overall
Air
Length
Consumption
3
(in)
(m
/min) (cfm)
13
8-
/
32
1
35
9
8-
/
16
13-07
www.air-allied.com.au
Hose Size
(mm)
(in)
9.5
3/8
No.5

Advertisement

loading
Need help?

Need help?

Do you have a question about the TAG-40FLH and is the answer not in the manual?

Questions and answers

Summary of Contents for Toku TAG-40FLH

  • Page 1 2. ( See diagram above for Pipe, Hose and Fitting size. ) Always use GENUINE TOKU TOOLS Replacement Parts. 3. When using two or more hoses, all except leader hose should be When replacement parts are required, order Part No. and Description in the 1/2"I.D.
  • Page 2 MAINTENANCE INSTRUCTIONS AIR ANGLE GRINDER TAG- 40FLH MODEL TOKU PNEUMATIC PRODUCTS 40FRH Exploded view Parts List www.air-allied.com.au Symbol Q'ty Req. Symbol Q'ty Req. Parts No. Description Parts No. Description 40FLH 40FRH 40FLH 40FRH 420576B80 - Throttle Valve Cover 130410200 Parallel Key 4X4X12 420576B0B -...

This manual is also suitable for:

Tag-40frh