Table of Contents
Advertisement
Figure 34. Remove seven screws and the system board with the USB board cable
Screw specifications
M1.6 × L3
M2 × L4
Step 4.
Peel off the mylar. Then, disconnect and remove the USB board cable from the system board.
Figure 35. Peel off the mylar and remove the USB board cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
System board
USB board cable
RF EDP absorber
Number of screws
4
3
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
47
Hide quick links:
Advertisement
Table of Contents
