Page 2
WiFi Module CDW-61723DE-00 更改记录: Reversion History: 版本 日期 更改内容 Version Date Modification 2021.05.11 First release 深圳市中龙通电子科技有限公司 Page 1...
Page 3
WiFi Module CDW-61723DE-00 1. Overview The 61723DE-00 is a single-die wireless local area network (WLAN) and Bluetooth (BT) combination solution to support 1 × 1 IEEE 802.11b/g/n WLAN standards and BT 5.0 + HS, enabling seamless integration of WLAN/BT and low-energy technology.
WiFi Module CDW-61723DE-00 3. General Specification Model CDW-61723DE-00 Product Name WLAN 11b/g/n PCIe 1T1R + Bluetooth 5.0 module Major Chipset RTL8723DE-VB-CG Standard 802.11b/g/n Modulation Method BPSK/ QPSK/ 16-QAM/ 64-QAM Frequency Band 2.4GHz ISM Band WiFi Interface PCIe1.1 BT Interface USB2.0 Operating Temperature -20°...
Page 6
WiFi Module CDW-61723DE-00 Name Type Description Voltage — No connect — No connect — No connect 3.3V 3.3V INPUT 3.3V 3.3V 3.3V INPUT 3.3V — Ground connections — NFC_RF_DIS No connect — NFC_INT No connect — NFC_CLK No connect —...
Page 7
WiFi Module CDW-61723DE-00 — PCIe Receive Data —N PCIE_RX_N — PCIe Receive Data —P PCIE_RX_P — Ground connections — No connect — No connect — No connect — No connect — No connect — No connect — No connect —...
Page 10
WiFi Module CDW-61723DE-00 9 Baking & storage temperature A. Storage life:12 months. Storage conditions:<40℃. Relative humidity:<90%R.H. (保存期限:12个月,储存环境条件:温度在:<40℃,相对湿度:<90%R.H.) B. After this bag is opened , devices that will be subjected to infrared reflow, vapor-phase reflow, or equivalent processing must be .(模块包装被拆后,SMT 组装之时限) a.
Page 11
WiFi Module CDW-61723DE-00 10. Recommended Reflow Profile Referred IPC/JEDEC standard. Peak Temperature : <250° C 深圳市中龙通电子科技有限公司 Page 10...
WiFi Module CDW-61723DE-00 11. Packing information 34±2mm Vacuum packing AL BAG ANTI-STATIC Color of plastic disc: blue A roll of 1000pcs (前后留空20pcs) inner box K3K: 33.5cm*34.7cm*7cm A box of 1000 PCS carton K=A: 36.4*35.7*37.5cm A case of 5000 PCS ESD CAUTION The 61723DE-00 is ESD (electrostatic discharge) sensitive device and may be damaged with ESD or spike voltage.
Page 13
WiFi Module CDW-61723DE-00 FCC WARNING FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two...
Page 14
WiFi Module CDW-61723DE-00 Requirement per KDB996369 D03 2.2 List of applicable FCC rules List the FCC rules that are applicable to the modular transmitter. These are the rules that specifically establish the bands of operation, the power, spurious emissions, and operating fundamental frequencies.
Page 15
WiFi Module CDW-61723DE-00 2.5 Trace antenna designs For a modular transmitter with trace antenna designs, see the guidance in Question 11 of KDB Publication 996369 D02 FAQ – Modules for Micro-Strip Antennas and traces. The integration information shall include for the TCB review the integration instructions for the following aspects: layout of trace design, parts list (BOM), antenna, connectors, and isolation requirements.
Page 16
WiFi Module CDW-61723DE-00 2.7 Antennas A list of antennas included in the application for certification must be provided in the instructions. For modular transmitters approved as limited modules, all applicable professional installer instructions must be included as part of the information to the host product manufacturer. The antenna list shall also identify the antenna types (monopole, PIFA, dipole, etc.
Page 17
WiFi Module CDW-61723DE-00 2.10 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.