Setting Time & Date; Setting Alarm; Setting Auto Start - ViewSonic VFM1035-52 User Manual

Setting time & date
You can set the system time to current date and time so that the Clock and Calendar display are correct.
1. Select the SETUP icon on the main menu and then touch [ ]. The Setup Menu appears on the screen.
2. Touch [ ] or [ ] to select Clock/Calendar Setup, and then touch [ ].
3. Touch [ ] or [ ] to select Set Time or Set Date, and then touch [ ].
4. Use [ ] or [ ] to highlight next or previous setting (hour/minutes or year/month/day), and then touch [ ] or [ ] to adjust the time or date.
5. Touch [ ] to confirm or touch [ ] to exit.

Setting Alarm

The Digital Photo Frame can also work as an alarm.
1. Select the SETUP icon on the main screen and touch [ ]. The Setup Menu appears on the screen.
2. Touch [ ] or [ ] to select Alarm setup, and then touch [ ].
3. Touch [ ] or [ ] to select alarm 1, alarm 2, alarm 3 or alarm 4, and then touch [ ].
4. Use [ ] or [ ] to highlight next or previous setting (hour, minutes, schedule, ring tone,), and then touch [ ] or [ ] to adjust the time, select
the ring bell or select the schedule as following:
Off: Disables the alarm clock function.
Every day: The alarm clock will start to ring at the specified time everyday.
Once: The alarm clock will start to ring at the specified time once.
5. Touch [ ] to confirm or touch [ ] to exit.

Setting Auto start

You can set the Digital Photo Frame to run a specified mode automatically when you switch on it.
1. Select the SETUP icon on the main menu and then touch [ ]. The Setup Menu appears on the screen.
2. Touch [ ] or [ ] to select General Setup, and then touch [ ].
3. Touch [ ] or [ ] to select Auto run, and then touch [ ].
ViewSonic
18
VFM1035-52