Advertisement
String Trimmer
Operator's Manual
WARNING:
Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious personal injury.
Save these instructions in a safe place and on hand so that they can be read when required.
Keep these instructions to assist in future servicing.
REV 02/14/20
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Super Handy GUO040
Summary of Contents for Super Handy GUO040
- Page 1 String Trimmer Operator's Manual WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Save these instructions in a safe place and on hand so that they can be read when required. Keep these instructions to assist in future servicing.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Important Safe Operation Practices ----------------------------------------------------------------------- 1-7 Assembly & Set-Up ------------------------------------------------------------------------------------------- 7-10 Controls & Operation --------------------------------------------------------------------------------------- 10-12 Service --------------------------------------------------------------------------------------------------------- 12-14 Troubleshooting -------------------------------------------------------------------------------------------------- 14 Parts Breakdown -------------------------------------------------------------------------------------------- 15-16 READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. - Page 3 3. This machine is a precision piece of power equipment, not a plaything. Therefore, exercise extreme caution at all times. This machine has been designed to perform one job: to cut vegetation and grass. Do not use it for any other purpose. 4.
- Page 4 23. Shut the engine off and wait until the spindle comes to a complete stop before cleaning the discharge area. The spindle continues to rotate for a few seconds after the control lever is released. Never place any part of the body in the trimmer line area until you are sure the spindle has stopped rotating.
- Page 5 Service Safe Handling Of Gasoline: 1. To avoid personal injury or property damage use extreme care in handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Serious personal injury can occur when gasoline is spilled on yourself or your clothes, which can ignite. Wash your skin and change clothes immediately.
- Page 6 9. Check fuel line, tank, cap, and fittings frequently for cracks or leaks. Replace if necessary. 10. Do not crank engine with spark plug removed. 11. Maintain or replace safety and instruction labels, as necessary. 12. Observe proper disposal laws and regulations. Improper disposal of fluids and materials can harm the environment.
- Page 7 DANGER -THROWN DEBRIS Remove objects that can be thrown by the machine in any direction. Wear safety glasses. DANGER-SLOPES Use extra caution on slopes. Do not trim on slopes greater than 15°. WARNING-GASOLINE IS FLAMMABLE Allow the engine to cool at least two minutes before refueling. WARNING-CARBON MONOXIDE Never run an engine indoors or in a poorly ventilated area.
-
Page 8: Assembly & Set-Up
USE THIS SLOPE GAUGE TO DETERMINE IFA SLOPE IS TOO STEEP FOR SAFE OPERATION! To check the slope, proceed as follows: 1. Remove this page and fold along the dashed line. 2. Locate a vertical object on or behind the slope (e. g. a pole, building, fence, tree, etc.) 3. - Page 9 Assembly NOTE: This string trimmer is shipped without gasoline or oil in the engine. Fill up the gasoline and oil as instructed in the Engine Operator's Manual BEFORE operating your machine. Fix the handrail fixing rod: 1. Use B (hex flange bolt M8 * 40) to pass through the fixing hole of A (handrail fixing rod).
- Page 10 Assemble the lower cover Use 4pcs A (half round head square neck bolt M6 * 20) and 4pcs D (non-metallic insert flange nut M6) to fix C (bottom cover) on B (string trimmer cover). Upper Handle 1. Remove the wing knob (a) and carriage bolt (b) from the left lower handle and the right lower handle.
-
Page 11: Controls & Operation
Starter Rope 1. Disconnect the spark plug boot from the spark plug (refer to the Engine Operator's Manual). 2. Pivot the control handle against the upper handle and pull the rope out of the engine. 3. Loop the rope through the eye bolt. See Figure 2-3. - Page 12 Controls Recoil Starter The recoil starter is attached to the right side of the upper handle. Stand behind the unit and pull the recoil starter rope to start the unit. Trimmer Deflector The trimmer deflector is connected to the trimmer base and it is used to prevent debris from being thrown.
-
Page 13: Service
The operation of any string trimmer can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the string trimmer, or while performing any adjustments or repairs on it. The string trimmer is designed with the spindle offset to the left side, allowing the operator to trim along a fence, landscaping, or a house to his or her's right side without having to make any adjustments to the machine. - Page 14 Lubrication 1. Lubricate pivot points on the control lever at least once a season with light oil. This control must operate freely in both directions. See Figure 4-1. 2. Lubricate the wheels at least once a season with light oil (or motor oil). If wheels are removed for any reason, lubricate surface of the axle bolt and inner surface of the wheel with light oil.
-
Page 15: Troubleshooting
0ff-Season Storage Take the following steps to prepare your trimmer for storage. Refer to Engine Operator's Manual for specific engine storage instructions. Clean and lubricate trimmer. Store trimmer in a dry, clean area. Do not store next to corrosive materials, such as fertilizer. Using a light oil or silicone, coat the equipment, especially cables and all moving parts of your string trimmer. -
Page 16: Parts Breakdown
Parts Breakdown... - Page 17 Part No. Description Q’ty Part No. Description Q’ty Throttle Cable（119cm*132cm） Hex head bolt full thread (M6 * 16) Slotted horn bolts (M6 lead screw length 33) V-belt R145 engine Fixed cover Hex flange bolt (M8x50) Trimmer line（3*3） Top cover fixings Outer shaft bracket Top cover Standard type elastic washer (8)
- Page 20 Great Circle USA Support Line: 1-866-493-0524 superhandy@greatcircleus.com www.greatcircleus.com Size: 145x210mm 157克铜版纸 REV 02/14/20...
Need help?
Do you have a question about the GUO040 and is the answer not in the manual?
Questions and answers
How come you can't find parts for this damn thing anywhere?
Spark plug tool. I cannot find anything to remove the spark plug Not enough clearance. Is there a tool that I possibly miss placed?
Why is this machine so hard to start and what might be the problem with it not starting?